Solid stock and cross-ply panels for cabinetry, wall treatments, and more
Teragren's Xcora® strand bamboo panels and veneer are ideal for any interior use where hardwood may traditionally be used, including cabinetry, reception areas, wall treatments, furniture and more. Our Xcora strand panels and veneer machine nicely, finish cleanly and offer a selection of colors along with a hardwood look-alike grain pattern that make these products a preferred substitute to hardwood plywood for increased durability, a unique and refined look, and low environmental impact. Xcora strand bamboo panels are manufactured with a combination urea formaldehyde-free adhesive.
4’x6’x3/4” | 3-ply | UFP-SYN-C-3/4-4X6 4’x6’x1/4” | Solid Stock | UFP-SYN-C-1/4-4X6-2 4’x6’x1/8” | Solid Stock | UFP-SYN-C-1/8-4X6-4 4’x6’x1/42” | Solid Stock | 25g fiber backing VENSTRAND-C-18601220
4’x6’x3/4” | 3-ply | UFP-SYN-W-3/4-4X6 4’x6’x1/4” | Solid Stock | UFP-SYN-W-1/4-4X6-2 4’x6’x1/8” | Solid Stock | UFP-SYN-W-1/8-4X6-4 4’x6’x1/42” | Solid Stock | 25g fiber backing VENSTRAND-W-18601220
4’x6’x3/4” | 3-ply | UFP-SYN-B-3/4-4X6 4’x6’x1/42” | Solid Stock | 25g fiber backing VENSTRAND-B-18601220
4’x6’x3/4” | 3-ply | UFP-SYN-J-3/4-4X6
Specifications:
ADHESIVE
All adhesives are CARB compliant. See the Product Chart for adhesive make-up by product.
HARDNESS
160% Harder Than Oak
GRIT
Sanded to 180 grit all sides. 120 grit for 1/42” veneer.
WARRANTy:
Five Years from the date of purchase.
Teragren LLC warrants that our Panels and Veneer will not delaminate or separate as a result of a manufacturing defect during the Warranty Period. Teragren further warrants that the Panels and Veneer are free from defects in material and manufacturing when used for their intended interior application.
INDOOR AIR QUALITY
SCS Indoor Advantage Gold certified: 3/4”, 1/4” 1/8”
ECOSMART
Certified USDA BioPreferred – 94% biobased product: 3/4”, 1/4”, 1/8”
LEED v3 credit
MR 6 – Rapidly Renewable Materials: 3/4”, 1/4” 1/8”, 1/42”
IEQ 4.4 – Low Emitting Materials: 3/4”, 1/4” 1/8”
Fabrication & Installation:
ACCLIMATION + SITE CONDITIONS
Ensure product is maintained at 35-55% relative humidity throughout fabrication and installation. Bamboo, like hardwood, may expand or contract when exposed to high or low relative humidity.
ADHESIVES
Most common woodworking adhesives suitable to the cabinet and furniture manufacturing industry have been used successfully and can be recommended such as polyvinyl acetates (PVA) glue and aliphatic resin glue (yellow glue)
LAMINATION
Veneer may be cold molded, vacuum pressed or hot pressed. Veneer and substrate must both have the same moisture content prior to laminating.
RADIUS APPLICATIONS
1/42” and 2-ply veneer are best used for a radius application when laminated to a kerfed or flexible substrate. 1/8” Traditional and Strand bamboo panels may also be considered for moderate radius applications
CUTTING AND TOOLING
Standard hardwood woodworking guidelines apply, carbide tipped tools recommended.
FASTENING
Pilot holes, pre-drilling, oversized slots for screw inserts, panel clips or other methods that allow for expansion and contraction are necessary for unrestrained applications and countertops.
