Wall Protection
Lighting
STANDOFF .75" X .50"
.75" (19mm) Diameter, .50" (13mm) Length, Satin Silver i41542Lumicor Stand-off’s are designed to be used with Lumicor material thickness of .236".
Includes:Barrel, Cap & (1) #8x1.5" Phillips Flat Head Wood Screw
STANDOFF .75" X 1"
.75" (19mm) Diameter, 1" (25mm) Length, Satin Silver i41657Lumicor Stand-off’s are designed to be used with Lumicor material thickness from .236" to .472".
Includes:Barrel, Cap & (1) #8x1.5" Phillips Flat Head Wood Screw
STANDOFF .75" X 2"
.75" (19mm) Diameter, 2" (50mm) Length, Satin Silver i41658Lumicor Stand-off’s are designed to be used with Lumicor material thickness from .236" to .472".
Includes:Barrel, Cap & (1) #8x1.5" Phillips Flat Head Wood Screw
STANDOFF 1" X .50"
1" (25mm) Diameter, .50" (13mm) Length, Satin Silver i41659Lumicor Stand-off’s are designed to be used with Lumicor material thickness of .236".
Includes:Barrel, Cap & (1) #8x1.5" Phillips Flat Head Wood Screw
STANDOFF 1" X 1"
1" (25mm) Diameter, 1" (25mm) Length, Satin Silver i41660Lumicor Stand-off’s are designed to be used with Lumicor material thickness from .236" .472".
Includes:Barrel, Cap & (1) #8x1.5" Phillips Flat Head Wood Screw
STANDOFF 1" X 2"
1" (25mm) Diameter, 2" (50mm) Length, Satin Silver i41661Lumicor Stand-off’s are designed to be used with Lumicor material thickness from .236" to .472".
Includes:Barrel, Cap & (1) #8x1.5" Phillips Flat Head Wood Screw
BUTTON CAP .75"
.75" (19mm) Diameter, Satin Silver i41663Lumicor Button Cap's are designed to be used with Lumicor material thickness from .118” to .472”.
Includes:Plate, Cap & (1) #8x1.5" Phillips Flat Head Wood Screw
BUTTON CAP 1"
1" (25mm) Diameter, Satin Silver i41664Lumicor Button Cap's are designed to be used with Lumicor material thickness from .118” to .472”.
Includes:Plate, Cap & (1) #8x1.5" Phillips Flat Head Wood Screw
CABLE FLOOR/CEILING MOUNT
3mm, Satin Silver i41666 The cable floor/ceiling mount gives the ability to adjust, level and add tension to the cable system.
Includes:(3) #8x1.5" Phillips Flat Head Screws
CABLE SINGLE PANEL CONNECTOR 1/4"
1/4" (6mm) Gauge, Satin Silver i41667
Lumicor Panel Connector's are designed to be used with Lumicor material thickness from .118” to .236”
CABLE DOUBLE PANEL CONNECTOR 1/4"
1/4" (6mm), Satin Silver i41668
Lumicor Panel Connector's are designed to be used with Lumicor material thickness from .118” to .236”
CABLE DOUBLE PANEL CONNECTOR 3/8"
3/8" (9mm), Satin Silver i41669
Lumicor Panel Connector's are designed to be used with Lumicor material thickness from .236” to .354"
CABLE SINGLE PANEL CONNECTOR 3/8"
3/8" (9mm), Satin Silver i41670
Lumicor Panel Connector's are designed to be used with Lumicor material thickness from .236” to .354"
CABLE CEILING HORIZONTAL PANEL CONNECTOR 3/4"
3/4" (19mm) i41672
Lumicor Cable Ceiling Horizontal Panel Connector's are designed to be used with Lumicor material thickness from .236” to .354".
CABLE STAINLESS STEEL
1/8" x 15 feet long (3mm cable) i41673
This thin cable combined with panel clamps or stand off’s can be used to suspend Lumicor and create decorative interior elements.
CEILING/FLOOR TRACK
i41681 When you don’t have an anchor point in the ceiling or floor, this track can be used to span between structural members. This track combined with our cable system supports Lumicor panels in creating decorative interior features.
BRASS T-SLOT CABLE CONNECTOR
i41683
The T-slot connector is used in conjunction with the Ceiling/Floor track. This hardware connects the Cable Mount to the track.
DECORATIVE CABLE ESCUTCHEON
i40012 This decorative hardware is used in conjunction with our cable system and creates a finished look while covering the hole drilled in suspended ceiling tiles. It is 1.75" (45mm) in diameter, .187" (4.76 mm) tall, and fits a 1/8" (3mm) diameter cable
SILL & ANCHOR
Part of the Frame Partition System. Standard finish is Satin Natural, but is available in other finishes. Standard kits designed for 3/8” thick Lumicor, but it is also available for ½” thick Lumicor.
HEADER
Part of the Frame Partition System. Standard finish is Satin Natural, but is available in other finishes. Standard kits designed for 3/8” thick Lumicor, but it is also available for ½” thick Lumicor.
VERTICAL POST
Part of the Frame Partition System. Standard finish is Satin Natural, but is available in other finishes. Standard kits designed for 3/8” thick Lumicor, but it is also available for ½” thick Lumicor.
90 DEGREE CORNER VERTICAL POST
Part of the Frame Partition System. Standard finish is Satin Natural, but is available in other finishes. Standard kits designed for 3/8” thick Lumicor, but it is also available for ½” thick Lumicor.
SUSPENDED WALL SYSTEM TRACK
This system is designed for ½” thick Lumicor, but it is also available for ¾” thick Lumicor. Available in Brushed Stainless, Polished Stainless, Satin Anodized, Dark Bronze, Polished Brass, and Satin Brass.
CLEAR PANEL CLAMP
This clear acrylic clamp is designed to be used with 3/8” thick or ½” thick Lumicor panels. This hardware is used to align two large Lumicor Panels side-by-side.
J CAP .188
.118" (3mm) Gauge
Part of the Wall Protection system, this trim can accent .118” thick Lumicor. Available in a satin clear aluminum finish.
J CAP .060
.060" (1.5mm) Gauge
Part of the Wall Protection system, this trim can accent .060” thick Lumicor. Available in a satin clear aluminum finish.
J CAP .045
.045" (1mm) Gauge
Part of the Wall Protection system, this trim can accent .045” thick Lumicor. Available in a satin clear aluminum finish.
OUTSIDE CORNER
Part of the Wall Protection system, this trim can accent Lumicor panels. Available in a satin clear aluminum finish.
LUMILIGHT DESIGNER FRAME
This frame is designed to easily mount to any vertical surface. Any Lumicor décor that is .060” thick can easily be inserted into this frame. Available in Satin Anodized finish.
SINGLE TOP GUIDE TRACK
Part of the Frame Sliding Door System. Standard finish is Anodized Aluminum. Standard kits designed for 3/8” thick Lumicor. Please inquire about options for ¼” Lumicor panels.
DOUBLE TOP GUIDE TRACK
Part of the Frame Sliding Door System. Standard finish is Anodized Aluminum. Standard kits designed for 3/8” thick Lumicor. Please inquire about options for ¼” Lumicor panels.
SINGLE BOTTOM RUNNING TRACK
Part of the Frame Sliding Door System. Standard finish is Anodized Aluminum. Standard kits designed for 3/8” thick Lumicor. Please inquire about options for ¼” Lumicor panels.
TOP ALUMINUM FRAME PROFILE
Part of the Frame Sliding Door System. Standard finish is Anodized Aluminum. Standard kits designed for 3/8” thick Lumicor. Please inquire about options for ¼” Lumicor panels.
BOTTOM ALUMINUM FRAME PROFILE
Part of the Frame Sliding Door System. Standard finish is Anodized Aluminum. Standard kits designed for 3/8” thick Lumicor. Please inquire about options for ¼” Lumicor panels.
VERTICAL ALUMINUM FRAME PROFILE
Part of the Frame Sliding Door System. Standard finish is Anodized Aluminum. Standard kits designed for 3/8” thick Lumicor. Please inquire about options for ¼” Lumicor panels.
DOUBLE BOTTOM RUNNINGTRACK
Part of the Frame Sliding Door System. Standard finish is Anodized Aluminum. Standard kits designed for 3/8” thick Lumicor. Please inquire about options for ¼” Lumicor panels.